Sometimes, you get a second chance (Part I)

Rail karma is something I'm sure we've all experienced. You just miss the head end of a train or you get trackside just in time to see the flashing end-of-train device winking at you in scorn as it disappears down the tracks. Then there's the times when you sit trackside and nothing materializes. I can't tell you the number of times I've experienced all three. 

That was why, when I arrived at the Sarnia rail yard for one last chance to see some trains on a family trip last summer, I was disappointed to see a very long freight train slowly making its way west toward the tunnel beneath the St. Clair River. I decided to watch it anyway, to see if maybe there was a DPU unit or some interesting rolling stock.

Then something happened. The train stopped. Then it began to back up. Could this be a second chance for me? Well, yes and no.

Let me explain.

As I was shooting any type of rolling stock I found interesting, I noticed the train was slowing down. Then it started backing up.

The backup move allowed me to snap a few shots of rolling stock, like this CN coil car, with the maroon IHB cover. Again, this was all very routine for me. I was just hoping that the train might back up enough that I could get a shot of the head end. Sadly, it stopped just short of the end of the platform. I walked along a public road as far as I could to get a shot of the two units from public property, but the train was just not cooperating.

This was about as close as the crew came. Over the course of ten or 15 minutes, the train backed up and then moved forward several times. More recently, readers have told me that this is due to the railway scanning its trains before they cross international borders. In this case, it wouldn't back up to the platform or move past CP Hobson sign. So, I decided to improvise and see if I could use the signal gantry near the platform to get some worthwhile shots.

This shot above had the most blue in it, which was nice, since I was shooting after 8 p.m. and the daylight was beginning to recede while the shadows grew longer.

Here's a shot from the platform. I do like the reflection of the setting sun against the side of the train, but I don't like that a pole pretty much blocked out the power from this vantage point. All in all, it was a frustrating few moments.

On one hand, if the train started moving, I had a great chance to get to a vantage point near the St. Clair Tunnel and get my first ever shot of a train entering the tunnel. On the other hand, if the train sat where it was, I was limited in my ability to get a shot from in front of it. After a few minutes, I decided to risk my position at the station, figuring the train was not going to back up and give me the shot I wanted.

I decided to risk getting a vantage point near the tunnel to get ahead of this train. 

But it's never that easy. Railfans in Sarnia know that the pedestrian walkway near the tunnel has been closed for some time, essentially, eliminating that potential spot. That left the Donahue Bride. This bridge provides a link over the tunnel track between the actual residential south end of Sarnia and the northern edge of the Chemical Valley. 

Luckily, there is a pedestrian sidewalk on the bridge, which affords you a long view of Sarnia Yard and the long descending track leading to the tunnel. 

There were two things I had to consider. Was the train in a position where I could see it from the bridge? And was it going to stay there? Also, how effective could my image be, considering how much I had to rely on the zoom function? 

I was about to find out. I'll leave that to the next post. 

The traffic jam

This March, while I was visiting family in the Sarnia area, my brother and nephew took me on a tour of their favourite spots in the area, including many railside haunts. On our way home, we saw a CN train perched near Telford Road, just east of the limits of Sarnia Yard. My nephew was excited by this slow moving train, as we had not seen any freight trains at speed during our day of railfanning in the area. This was the train as it approached the crossing and then stopped. Note that the Strathroy Subdivision is double-tracked here, and there are trains on both tracks visible in the image below, taken from the Confederation Line.

Just a few minutes earlier, we had left Sarnia Yard, where another freight train, this one heading west toward the Paul Tellier Tunnel, also stopped before proceeding down the grade to the tunnel. A few railfans in the parking lot explained to us that the train was backing up and proceeding forward for a reason. At first, I'll admit that I was curious as to why this train would be doing this, unless they were assembling part of the train that I could not see. The railfans said they were "x-raying" the train. I'm not exactly sure that is the right term, but the sense I got from what they told me was the the train was being scanned before it headed into the United States. Here's a shot of the consist inching forward.

At either end of the yard, there were two enormous freight trains, one due east and one due west. Neither was moving. I joked to my nephew that it was a genuine rail traffic jam. Of course, this was not the case, as precision scheduled railways do not usually have trains with massive dwell times taking up space in congested rail yards. Sarnia Yard usually has its share of cars in the yard, but it's never what you would describe as congested or backed up. The blocks of cars appear very organized, at least to my untrained eye. Still, it was an odd sight to see two freight trains, on both tracks on the main line, apparently motionless. 

Moving back to the train due east near Telford Road. Here is a shot as it moved ahead past the end of the westbound train from the image above. I find it interesting whenever I see autoracks behind the engines. It's not something that was terribly common when I was growing up. These cars always seemed to be blocked onto the end of a train. Not the case anymore.

You can see in the image above that the fields looked to be almost ready for planning, even in mid-March. Going back to the westbound train, which we watched for awhile before giving up, here's a shot of the head end through the gantry, which governs trains movements around the tunnel. The bridge also controls the connections to the converging St. Clair River Industrial Spur (and by extension, the CSX Sarnia Subdivision) and the Point Edward Spur, both of which merge into the yard west of these signals.

 

While I was at the yard, I did spy a tank car that had an old logo on it that is not terribly common these days. I remember these CGTX tank cars when I was younger, but they have slowly disappeared over the years. It was cool to spot one. I know it might seem like a mundane image, but I think it's more important now to capture images of old rolling stock than ever.

These images we got from the yard and from Telford Road rounded out a great day or railfanning, even if the actual number of trains we saw was pretty light. You can check out our other adventure from this day in the post Next stop: Glencoe. 

One last shot of an old GP9 idling behind the old roundhouse. This engine is on the approach track that trains off the St. Clair River Industrial Spur and CSX Sarnia Subdivision use to access Sarnia Yard. Sadly, this engine didn't move either. It seemed like a gridlock kind of day when nothing was moving. My nephew wasn't thrilled. I was just happy to get a few images.

Cabooses of Ottawa (2003-2022)

Since I began blogging in 2013, I have had a few moments where I was able to take in CN operations at Walkley Yard in the city. This is a tricky task, as the yard is largely inaccessible. At the end of Albion Road, there is a gravel access road where a few businesses retain civic addresses, which makes the road a grey area. I do not go down the gravel access road, as it seems to me to be trespassing. However, I have had occasions in the past to see that CN has made use of several cabooses, which provide for a little bit of interest in an otherwise dull railfanning city. 

The cabooses CN has made use of have varied in quality and origin. Given that CN largely stopped using cabooses by 1990-91, it makes the stories of the cabooses in use in Ottawa over the years that much more interesting. Mostly, the cabooses have been used for backwards movements or shoving movements, where the train's conductor needs a safe platform to observe what's ahead on the tracks as visibility from the engine is restricted at the rear.

CN 9106 (ex OCR 9106, ex Devco 9106)

In 2013, it was hard not to see this caboose from the end of Albion Road. It was parked in plain view, not far from the old maintenance building in the yard. It did not appear to be in active service.

By the time I started taking photos near Walkley, like this shot in 2015, the old caboose was a mess of graffiti and broken windows. You can just make out the marking of CN 9106 below the Devco Railway script above. But, upon closer inspection, the 9106 number was once followed by OCR, which is blacked out in this image. That means this caboose predated CN's operations and was used prior to 2008 by the former Ottawa Central Railway. I found this image online from 2003, which gives you an idea of how long it was used in the area.The Devco part had been painted over long ago, but the car retained its green and yellow Devco colours, if you don't count the abundance of graffiti.

This caboose is an AAR M930 class wide vision cupola caboose, which was a common van used by many Class I and regional railroads right up until the industry discontinued the use of these cars. This common caboose was built by International Car Co. from the early 1960s until the mid-1970s. They were in service until the end of the caboose era. CN also made a number of these cabooses at its shops in Montreal.

This caboose saw service on OCR and CN until it was taken out of service at some point in the early 2010s, at which point it sat in Walkley Yard and was left to the vandals. It's a shame that it was not preserved, as it probably saw a lot of service on the Devco Railway, the Cape Breton coal carrier that served the island's remaining coal mines and Sydney's interantional shipping piers between the late 19060s before that railway ended operations officially in 2001.

CN 79834 (ex Ottawa-L'Orignal 2000, ex OCR)

This caboose was in active service as late as 2013 in the city. It was a curiosity by any stretch, mostly because of its odd paint job and the even more curious inscription "Millennium" that was once stencilled onto the left side of the van. It disappeared from Walkley Yard years ago, but was used for shoving moves on the Vankleek Spur as recently as 2020, as per this webpage. The car was built at the CN Point-St-Charles shops under the same number it bore through its later years of service with CN.

The car was sold to the Ottawa-L'Orignal Railway in 1996. The railway, which operated between Glen Robertson on the Alexandria Sub and Hawkesbury, was then bought out by the Ottawa Central, which continued to use the van until 2008 when CN bought OCR and a host of other assets, which meant this old caboose was back with its original owner.

Here's a 2013 shot of an Ottawa crew assembling a train on a Sunday morning, with the old Millennium caboose behind the engine.

These days, the old warhorse is back where it started, used for shoving moves in the Montreal area. It's interesting to speculate what happened to this van. When was it repainted from its original CN colours to blue? How did that paint scheme disintegrate? To be honest, it looks like the paint on this car was applied with roller brushes. I would love to know the story behind its unique appearance.

The only mystery I managed to solve was that the caboose was numbered OLOR 2000 when it was owned by the Ottawa-L'Orignal Railway, which would explain why it was called the Millennium caboose. Maybe someone on the railway had a sense of humour? 

DAWX 79872 (Ex CN 472000 boxcar)

This caboose, which was a former CN caboose, was in storage in Walkley Yard for years. The company that owns it is D.A. Walmsley and Company. It was attached to an RDC9 unit, also owned by DAWX. Sadly, both of these cars were subjected to arson, the RDC unit just recently. There isn't a lot of information about DAWX online, although a picture from locomotive and railway car rebuilding company IRSI in Moncton, New Brunswick provides a clue. This photo shows an old CP RDC, owned by DAWX, being rebuilt at the facility. The company clearly has railway holdings. I have not been back to Walkley Yard in a number of years, so I'm not sure what is to become of its torched RDC unit here or what happened to its previously torched ex-CN caboose. The only information I could find about this caboose is from the Bytown Railway Society, which lists some of its history in this document. From this document, I learned this old caboose was actually a converted boxcar. That's about all I could find. How these cars came to be stored in Walkley Yard is a mystery. I can imagine there would be better places to store cars where the security was better.

GTW 79047

The most recent caboose to ply the rails here is this relatively fit looking Grand Trunk caboose, which has been used on the Arnprior Turn of late. You don't have to look too hard online to find photos of this van in various CN yards across its system in Michigan (ex-GTW territory), Ontario and Winnipeg. It has seen a lot of yard duty, judging by the photos I have seen in various rail photo forums.

Since crews here have to do a fair bit of backward moves on the Smiths Falls Sub to Federal, not to mention on the Vankleek and former OLOR, it's not surprising that CN would want to have one of these old warhorses around to make things easier for the local crew. It certainly has provided a fair bit of excitement among railfans in the area who are making the weekly run to Arnprior a regular spectator sport of late.

Many of us bemoan the lack of variety on today's modern railways. CN's continued use of cabooses in this region certainly gives local railfans one tiny thing to brag about that those along the mainlines cannot claim.